|
| Place of Origin: | Henan China |
| Brand Name: | SIMO |
| Certification: | CE, ISO9001:2008,TUV |
| Model Number: | SIMO Blower 8-17 |
Stainless Steel Induced Draught High Pressure Centrifugal Blower Fan
Introduction
The 8-17 series high-pressure small-flow centrifugal fan is designed for applications requiring high pressure.
Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement.
The centrifugal fans are divided into general type, explosion-proof type, anti-corrosion type and high temperature type.
The centrifugal fan impeller is subjected to a high standard of dynamic balance correction to ensure stable operation of the fan.
After the production is completed, after running test and vibration value detection, the operation is reliable.
There are a variety of options to choose from.
Technical data
| Centrifugal Fan series | Centrifugal Fan model | Rotation Speed (r/min) |
Total Pressure (Pa) |
Air Capacity (m³/h) |
Power (KW) |
|---|---|---|---|---|---|
| 8-17 | 7.1A | 2900 | 10728～11973 | 768～2919 | 11～18.5 |
| 8A | 2930 | 14297～15680 | 1110～4219 | 22～37 | |
| 9A | 2930 | 18308～20250 | 1591～6019 | 37～55 |
Advantages and Features
1. Stainless Steel Induced Draught High Pressure Centrifugal Blower Fan can output high outgas pressure and can work at higher medium temperature, suitable for any industrial occasion where high pressure & high temperature gas needs to be delivered.
2. In the case of common base, the installation is very simple and requires little support from a professional technician.
3. The centrifugal fan bearing housing is reserved for the installation position of the temperature and vibration sensors, and the fan operation monitoring device can be conveniently installed.
4. When the airflow resistance is increased, the motor load will be automatically reduced and the motor will not be burnt.
5. Customized design according to customer's performance requirements, and optimized by CFD technology, the energy consumption is lower than similar models.
6. The tight fit between the components and the good sealing performance ensure that the output pressure is not reduced.
