|
| Place of Origin: | Henan China |
| Brand Name: | SIMO |
| Certification: | CE, ISO9001:2008,TUV |
| Model Number: | SIMO Blower 9-03 |
Alternating Current High Air Flow Drying High Pressure Centrifugal Fan
Introduction
1. Customized design according to customer performance requirements, and optimized by CFD technology, the energy consumption is lower than similar models.
2. The parts are closely matched and have good sealing performance to ensure the output pressure will not be reduced.
3. The impeller is calibrated by high standards for dynamic balance to ensure stable operation of the fan.
4. Running test and vibration value detection after the production is completed, the fan operation is reliable.
5. There are a variety of part options to choose from.
Technical data
| series | model | Rotation Speed (r/min) |
Total Pressure (Pa) |
Air Capacity (m³/h) |
Power (kW) |
| 9-03 | 8D | 2950 | 16680～17631 | 3019～8117 | 37～55 |
| 9D | 2950 | 21348～22314 | 4326～11632 | 75～110 |
Advantages and Features
1.The fan can output higher gas pressure, and can provide more gas flow at the same time, low noise.
2. In the case of using the common base, the installation is very simple and basically does not require the support of professional technicians.
3. The motor shaft is elastically connected with the drive shaft. It is not necessary to tighten the belt or replace the belt frequently, and the maintenance workload is small.
4. The fan system running at normal temperature with an impeller diameter of less than 1400 mm does not require additional configuration of bearing cooling device, which reduces the user's investment and maintenance workload.
