High Pressure Centrifugal Fan for Industrial Drying and Air Handling

High Pressure Centrifugal Fan for Industrial Drying and Air Handling

Introduction

Industrial drying systems need stable airflow and sufficient pressure to move heated air through ducts, chambers and process equipment.

This centrifugal fan is designed for high-pressure air handling applications, including industrial drying, ventilation and process air supply.

The fan can be configured according to the required airflow, pressure, temperature and installation conditions, making it suitable for different industrial process systems.

Technical data

                                                           
Advantages and Features

1.The fan can output higher gas pressure, and can provide more gas flow at the same time, low noise.

2. In the case of using the common base, the installation is very simple and basically does not require the support of professional technicians.

3. The motor shaft is elastically connected with the drive shaft. It is not necessary to tighten the belt or replace the belt frequently, and the maintenance workload is small.

4. The fan system running at normal temperature with an impeller diameter of less than 1400 mm does not require additional configuration of bearing cooling device, which reduces the user's investment and maintenance workload.

Applications

Industrial Drying Systems

Used for moving hot air through:

• Drying chambers
• Material drying equipment
• Thermal processing systems
• Industrial production lines

High Pressure Ventilation

Suitable for:

• Factory ventilation
• Process ventilation
• Long-distance air delivery
• Equipment exhaust

Process Air Supply

The fan can provide pressurized air for industrial processes where stable airflow and pressure are required.

Why Choose SIMO BLOWER?

The correct industrial fan is not simply the one with the highest pressure or motor power.

SIMO evaluates the complete operating condition, including:

• Airflow
• System pressure
• Gas temperature
• Dust characteristics
• Fan speed
• Motor power
• Installation conditions

This helps ensure that the selected fan matches the actual process rather than only the nominal specification.

FAQ

1.What is a high-pressure centrifugal fan used for?

High-pressure centrifugal fans are used where air must overcome higher system resistance, such as drying equipment, long duct systems, process ventilation and industrial air supply.

2.Can this fan be used for industrial drying?

Yes. It can be used for hot-air circulation and air supply in industrial drying systems when the airflow, pressure and temperature requirements are correctly matched.

3.What is the motor power of this fan?

The listed configuration uses a 55kW AC motor.

4.How do I choose a high-pressure centrifugal fan?

The key parameters are required airflow, system pressure, gas temperature, gas composition and installation conditions. Motor power should be determined after the fan operating point is established.

5.Can the fan be customized?

Yes. Fan structure, impeller, materials, motor and drive configuration can be customized according to the actual operating conditions.

Contact Us

Looking for a High Pressure Centrifugal Fan?

Send us your:

Airflow | Pressure | Temperature | Application | Motor Voltage

SIMO engineers will recommend a suitable fan configuration for your drying or industrial air-handling system.

Request a Fan Solution