Large Capacity Air Supply Of Industrial Kilns Centrifugal Fan
Introduction
The Large Capacity Air Supply Of Industrial Kilns Centrifugal Fan has moderate pressure and large flow, belongs to the low noise series fan and has stable performance.
It’s suitable for conveying normal temperature or high temperature non-flammable gas (normal air, high temperature gas, corrosive gas, dusty gas), and conveying granule/powder/chip/fiber material.
For dust-containing gas, we can meet various working conditions from a small amount of dust to a very large dust content. After special treatment, the surface hardness of the blade can reach HRC60~70, which can extend the life of the impeller by more than 3 times.The impeller is subjected to high standard dynamic balance correction to ensure stable operation of the fan.The fan system adopts a detachable design, which greatly reduces the transportation cost of customers.
Technical data
PRODUCT PARAMETERS
|
|||
industrial fan
Application
|
Temperature | Normal temperature air, Hot air | |
Air composition | Clean air, Dusty air, Corrosive gas, Combustible gas,Powder materials, Light particle materials | ||
industrial fan Performance
|
Impeller diameter | 400~3000 | mm |
Speed of mainshaft |
≤3000 |
rpm | |
Pressure range |
3160-16540 |
Pa | |
Flow range |
2473-484756 |
m3/h | |
industrial fan
Structure
|
Blade | Backward | |
Impeller support | SWSI (Single Width, Single Inlet), Impeller overhung. | ||
Drivetrain | Coupling | Can assign | |
Lubrication | Oil bath lubrication | ||
Bearing cooling | Air cooling, Water cooling, Oil cooling | ||
industrial fan
System
configuration |
Motor | ABB, SIEMENS, WEG, TECO, SIMO, Chinese brand… |
Can assign |
Impeller | Q235, Q345, SS304, SS316, HG785, DB685... | ||
Casing, Air inlet cone, Air inlet damper |
Q235, Q345, SS304, SS316, HG785, DB685... | ||
Main shaft | 45# steel(High-strength carbon structural steel), 42CrMo, Stainless steel... | ||
Bearing | FAG, SKF, NSK, ZWZ… | ||
industrial fan
Optional
components |
System base frame, Protective screening,Silencer, Inlet & Outlet pipeline compensator, Lube system, Overhead lube tank etc |
Advantages and Features
1. Large Capacity Air Supply Of Industrial Kilns Centrifugal Fan can output higher outlet pressure and provide more gas flow with lower noise. Ability to work stably at higher media temperatures.
2. Customized design according to customer's performance requirements, and optimized by CFD technology, the energy consumption is lower than similar models.
3. The airflow channel and the impeller have been optimized several times, which is more efficient and energy-saving than ordinary large-flow fans.
4. For the material of impeller and main shaft, we will choose high-strength carbon steel, low-alloy steel, high-temperature alloy steel, high temperature resistant high-strength alloy steel for different working conditions temperature and working speed, so that the impeller and main shaft can still maintain a reliable strength at high temperature.