"power plant blower"

Product Description: Our ID fans are built to handle a wide range of air volumes, ranging from 3000m3/h to 20000m3/h. This makes them suitable for use in a variety of applications, from small-scale heating systems to large industrial boilers. Our ID Fans are powered by high-quality AC motors, which provide reliable and efficient performance. The motors are available in a range of power outputs, from 5.5 kW to 1500 kW, ensuring that there is a model to meet your specific needs

Product Description: Our Induced Draft Fan product has been certified by CE and ISO, ensuring that it meets strict quality and safety standards. It is capable of achieving air volumes ranging from 3000 to 20000m3/h, making it suitable for a wide variety of industrial applications. The fan is also available in a range of power ratings, from 5.5 to 1500kW, allowing it to be tailored to the specific needs of each application. One of the key features of our Induced Draft Fan is

Product Description: The 9-10.19 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line chiller cooling, clinker cooler, circulating fluidized bed system, air purification and industrial waste gas

Product Description: Induced Draft Fan is a powerful and efficient fan for industrial use. It has a pressure range of 2000-10000Pa, and voltage of 380V/50Hz. It features a backward curved blade type to maximize airflow and an impeller testing process with dynamic balancing adjusting for optimal performance. With its highly reliable design, ID Fan has become an essential part of many industrial applications. The integrated ID Fan pressure control system provides precise and

High temperature high dust blower for Cement plant kiln exhaust blower High Temperature Blower Fan Temperature and dust are two challenges for this application, operation temperature may reach 500 degree C, Delivery capacity up to 700,000Nm3/hr with installed motor up to 4,500kW, the impeller diameter can reach 3.5m; model Rotation Speed (r/min) Total Pressure (Pa) Air Capacity (m/h) Power (kW) 8C 1450 18592745 1100026400 15 ~ 22 9C 1450 23533474 1570037500 30 ~ 45 10C

Building Material Factory Forced Draught Furnace Exhaust Fan Product Description Introduction Cement plant dust removal fan form 1) The fan is of single suction type. Machine number 2.828# 2) Each fan can be made into two forms: left-hand rotation or right-hand rotation. 3) The position of the fan outlet is expressed by the same outlet angle of the casing. 4) The fan transmission mode is A, motor direct connection mode B, C mode: belt drive D type: coupling transmission E,

Product Description: Boiler centrifugal fan centrifugal fan 18.5kw/15kw industrial induced draft fan The coal-fired boiler blower delivers flue gas or gas containing impurity particles. When the impurity concentration is less than 200mg/m3, it can be used for more than 4 years. It can be used if it contains large amounts of impurities, but its service life will be shortened. The operating temperature of the induced draft fan shall not exceed 250C. Boiler centrifugal fan can

Product Description: G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. They can transport clean gas, dusty gas, flammable gas, corrosive gas, powder or granular

Product Description: G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. They can transport clean gas, dusty gas, flammable gas, corrosive gas, powder or granular