"high temperature blower fan"

AC Motor Fluidized Bed Boiler Thermal Power Industry Centrifugal Blower Fan Introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas.The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the medium are not

Coupling Driving Heat Dissipation Antiwear Chemical Industry Blower Fan Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings.It can be used to input gas as well as to output gas.The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed in

Q235 Air Supply Anti-Explosion High Pressure Centrifugal Blower Fan Introduction XHP high-pressure centrifugal blower fan is suitable for high-pressure conveying of clean air at normal temperature and light granules/powder/crush/staple material, mostly used for air trough, forced ventilation, fast drying, forced Cooling and cooling, pressurization or decompression sealing of industrial equipment. However, the centrifugal blower fan is only used for conveying air and non

Coupling Driven Explosion Proofing Materials Drying Dust Collector Blower Fan Introduction The Coupling Driven Explosion Proofing Materials Drying Dust Collector Blower Fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement

Air Flow Single Suction High Wear Resistance Dust Collector Blower Fan Introduction The Air Flow Single Suction High Wear Resistance Dust Collector Blower Fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series centrifugal fan products with a wide range of performance. The designed max full pressure efficiency is higher than 80% new series boiler ventilation fans

Industrial Waste Heat Recovery Device Single Inlet Cement Fan Introduction Industrial Waste Heat Recovery Device Single Inlet Cement Fan have the characteristics of high efficiency, flat performance curve, wear resistance, and work stability. It has excellent performance and can output high pressure. Industrial Waste Heat Recovery Device Single Inlet Cement Fan can be used to transport normal temperature or high temperature non-flammable gases, particles, powder, debris,

Stainless Steel Induced Draught High Pressure Centrifugal Blower Fan Introduction The 8-17 series high-pressure small-flow centrifugal fan is designed for applications requiring high pressure. Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement. The centrifugal fans are divided into general type, explosion-proof type, anti-corrosion type and high temperature type. The centrifugal fan impeller is subjected to a high

Stainless Steel Energy Saving Smelting Furnace Backward Boiler Fan Introduction It can work stably at a high medium temperature, and can output a large gas flow with low noise when the pressure requirement is met.The fan blade placement angle is optimized, more wear-resistant and longer service life.The air damper can be used to flexibly adjust the pressure and flow of the fan during operation. It is also possible to select a variable frequency motor, with adjust the pressure

Industrial Boiler Induced Draft Antiwear Long Life Blower Fan Introduction 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. It is also suitable for conveying air and non-corrosive, non-self-igniting, non-viscous materials or light powder/debris/short fiber materials.