"high temperature blower fan"

Efficient Energy-Saving Industrial Waste Gas Treatment Centrifugal Flow Blower Fan Introduction The 5-06 series Centrifugal Flow Blower Fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. The Centrifugal Flow Blower Fan can be used for more than four years when the concentration of impurities is less than 200 mg/m3. If it

coupling driven Antiwear Large Capacity Centrifugal Flow Blower Fan Introduction The Coupling Driven Antiwear Large Capacity Centrifugal Flow Blower Fan is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. In the coal-fired boiler system, the ventilation and induce draft systems of various boilers with evaporation capacity of 20 tons/hour to

Alternating Current Fluidized Bed Boiler Dust Collector Blower Fan Introduction The Alternating Current Fluidized Bed Boiler Dust Collector Blower Fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles

Efficient Energy-Saving Coal-Fired Boiler Single Inlet Boiler Blower Fan Introduction The Efficient Energy-Saving Coal-Fired Boiler Single Inlet Boiler Blower Fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. It is a high-efficiency energy-saving

Q235 Single Inlet Forced Draft Of Industrial Kilns Centrifugal Boiler Blower Fan Introduction The Q235 Single Inlet Forced Draft Of Industrial Kilns Centrifugal Boiler Blower Fan can be used for indoor ventilation in general factories and large buildings. It can be used as both an input gas and an output gas. The type of gas transported is air and other non-self-igniting, non-self-explosive, non-surrounding, harmless to the human body and is non-corrosive to steel materials.

Q345 Efficient Energy-Saving Materials Delivery Of Industrial Kilns Material Handling Blower Introduction The Q345 Efficient Energy-Saving Materials Delivery Of Industrial Kilns Material Handling Blower centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid

Double Suction Heavy Duty Industrial Boiler Primary Air Centrifugal Blower Fan Introduction The 7-09 series medium pressure heavy duty centrifugal blower fan has moderate pressure and large flow, belongs to the low noise series fan and has stable performance. Its suitable for conveying normal temperature or high temperature non-flammable gas (normal air, high temperature gas, corrosive gas, dusty gas), and conveying granule/powder/chip/fiber material. Its a widely used

Heavy Duty Fluidized Bed Boiler Ventilation Air Blower Centrifugal Fan Introduction The 5-06 series centrifugal blower fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. Heavy Duty Fluidized Bed Boiler Ventilation Air Blower Centrifugal Fan can be used for more than four years when the concentration of impurities is less than

Industrial Boiler SA Single Inlet Dust Collector Centrifugal Blower Fan Introduction 1.The fan can output higher gas pressure, and can provide more gas flow at the same time, low noise. 2. In the case of using the common base, the installation is very simple and basically does not require the support of professional technicians. 3. The motor shaft is elastically connected with the drive shaft. It is not necessary to tighten the belt or replace the belt frequently, and the