"high temperature blower fan"

4-73 Boiler Induced Draft Fan Introduction Of 4-73 blower fan Product Description: G4-73 and Y4-73 Boiler Ventilating, and Induced Draft fans G4-73 and Y4-73 boiler ventilating and induced draft fans: are suitable for ventilating and induced draft fans of steam boilers below 670t/h in thermal power plants. The medium conveyed by the ventilator is air, and the maximum temperature shall not exceed 80C; the medium conveyed by the induced draft fan is flue gas, and the maximum

High Air Flow Explosion Protection Gas Delivery And Material Handling Blower Fan Introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas.The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the medium are

Industrial Stainless Steel Smoke Exhaust High Pressure Centrifugal Blower Fan Introduction Industrial Stainless Steel Smoke Exhaust High Pressure Centrifugal Blower Fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than 80C, and the dust and hard fine particles

Industrial Energy Saving Oven Wall Cooling Centrifugal Flow Blower Fan Introduction It is boiler induced draft Centrifugal Flow Blower fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in

Antiwear Industrial Boiler FD High Pressure Centrifugal Blower Fan Introduction Antiwear Industrial Boiler FD High Pressure Centrifugal Blower Fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. Antiwear Industrial Boiler FD High Pressure Centrifugal Blower Fan can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow

Medium Pressure Industrial Boiler Secondary Air Dust Collector Blower Fan Introduction The Medium Pressure Industrial Boiler Secondary Air Dust Collector Blower Fan is boiler induced draft fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the

Industrial Dust Collector Induced Draught Cement Centrifugal Blower Fan Introduction The 9-10 series high-pressure centrifugal fan is the latest developed high-efficiency and energy-saving product, whose performance fully meets the aerodynamic performance of general fan 9-08 series, and has the characteristics of high efficiency, low noise, flat performance curve, large flow regulation range and wide efficient area. Centrifugal fan is applied in industrial boiler, (centrifuga

Industrial Boiler Forced Induced Draft Building Ventilation Blower Fan Introduction The 6-05 medium-pressure series fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series centrifugal fan products with a wide range of performance. The designed max full pressure efficiency is higher than 80% new series boiler ventilation fans and induced draft fans with the low

Heat Dissipation Efficient Energy-Saving Induced Draft Centrifugal Blower Fan Introduction 6-06 series centrifugal fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50C (max 80C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Centrifugal fan is applied in