"high temperature blower fan"

V-Belt Driving Long Lifetime Flue Gas Centrifugal Blower Fan Introduction The V-Belt Driving Long Lifetime Flue Gas Centrifugal Blower Fan is boiler induced draft fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure

Materials Delivery Of Industrial Kilns Centrifugal Blower Fan Introduction Medium requirements for 6-03 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Medium temperature: The medium temperature of standard fans is not more than 80 C, the V-belt driving type fan can transport media below 150C for a long time when

Three Phase Industrial Fan For Ventilation Centrifugal Blower Fan Introduction 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. It is also suitable for conveying air and non-corrosive, non-self-igniting, non-viscous materials or light powder/debris/short fiber materials.

Boiler Q235 Carbon Structural Steel Air Inlet Extractor Fan Centrifugal Blower Detail introduction : The 5-06 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan

16Mn Single Inlet High Temperature Materials Drying Boiler Blower Fan Introduction This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles. It can be used for more than four years when the concentration of impurities is less than 200 mg/m3. If it contains a lot of impurities, it also can be used, but it will shorten the

16Mn High Temperature Material Handling Blower Anti-Explosion Introduction 6-12 series high-pressure heavy-duty centrifugal fan, suitable for conveying non-flammable gas and granule/powder/chip/fiber material at normal temperature or high temperature. Bearing cooling method: according to gas temperature and operating environment conditions choose low-cost water-cooling method or oil-cooling method with good heat dissipation performance. For extremely high temperature

Forced Draught Of Industrial Rotary Kilns High Pressure Air Blower Fan Introduction The 9-10 series high pressure centrifugal fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than 80C, and the dust and hard fine particles contained in the medium are not more than

Flue Gas Denitrification Low Pressure Q235 Heavy Duty Centrifugal Blower Fan Introduction The 4-14 series centrifugal heavy duty blower fan is suitable for indoor ventilation in general factories and large buildings. Flue Gas Denitrification Low Pressure Q235 Heavy Duty Centrifugal Blower Fan can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not

Backward Curved Drying Dust Collector Centrifugal Blower Fan Introduction 1. The Backward Curved Drying Dust Collector Centrifugal Blower Fan can output high pressure and is suitable for any industrial occasion where high pressure & normal temperature gas is required. 2. The energy transfer efficiency is high, the energy of the motor is directly applied to the impeller, and there is no energy consumption during the transfer. 3. The motor uses high-efficiency and energy-saving