"high temperature air blower"

Carbon Steel Single Suction Anti-Explosion Smoke Exhaust Flue Gas Fan Introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the medium are not more

Double Suction Energy Saving Exhaust Material Handling Blower Introduction It is a high-efficiency energy-saving product jointly designed by the national fan industry and organized by the national wind power industry and the Ministry of Machinery Industry. It has the characteristics of high efficiency, low noise, flat performance curve and wide efficient area. Industrial boilers of 5 ~ 35 tons/hour can be used, those with similar intake conditions and suitable performance can

HG785 Alloyed Steel Medium Pressure Backward Mine Ventilate Centrifugal Flow Fan Introduction 6-04 series fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. They are used in forging furnaces and high pressure forced ventilation and are widely used to transport materials and air. The maximum temperature should not exceed 250 degrees Celsius. Suitable for flow and dust removal ventilation systems in

Alloy Steel High Air Flow Industrial Boiler SA Centrifugal Flow Fan Introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the medium are not more

16Mn Single Suction High Volume Industrial Centrifugal Fans Materials Drying Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. Made of high quality carbon steel, Stainless steel or other metal materials can also be used according to user requirements. Detail introduction The impeller is annealed to completely eliminate structural stresses generated

Lime Rotary Kiln High Pressure Centrifugal Fan Wear Resistant Introduction The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. The fan housing shall be made in steel and its thickness and strength should be able to withstand the maximum running weight of the fan. The volute shall be continuously welded and equipped with access door for removing possible foreign objects

Stainless Steel High Volume Building Materials Industrial Centrifugal Blower Fan Introduction This series of industrial centrifugal fans can also be used for dust removal, mine ventilation and general ventilation systems. The medium transported by the forced draft fan is air, and the medium transported by the induced draft fan is flue gas or a gas containing impurity particles. It can be used for more than four years when the concentration of impurities is less than 200 mg/m3

High Pressure Efficient Energy-Saving Centrifugal Blower Fan Introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the medium are not more than 150

High Air Flow Energy Saving Industrial Boiler FD Flue Gas Fan Introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles contained in the medium are not more than 150