"centrifugal exhaust fan blower"

Furnace Coke Oven Medium Pressure Energy Saving Centrifugal Flow Fan Introduction 6-06 series centrifugal flow fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50C (max 80C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Furnace Coke Oven Medium Pressure

High Volume Industrial Equipments Heat Dissipation Centrifugal Flow Fan Introduction The 6-03 series centrifugal flow fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series of centrifugal fans with a wide range of performance. 6-03 series medium pressure centrifugal flow fans can be used to transport normal temperature or high temperature clean gas, dusty gas,

Industrial Energy Saving Oven Wall Cooling Centrifugal Flow Blower Fan Introduction It is boiler induced draft Centrifugal Flow Blower fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in

Clay Sand Rotary Kiln Ventilation Industrial Centrifugal Flow Fan Introduction 6-04 series Industrial Centrifugal Flow Fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. Industrial Centrifugal Flow Fans are used in forging furnaces and high pressure forced ventilation and are widely used to transport materials and air. The maximum temperature should not exceed 250 degrees Celsius. Suitable for flow

Stainless Steel Energy Saving Large Flow Centrifugal Ventilation Fans Introduction This centrifugal flow fan is suitable for indoor ventilation in general factories and large buildings.It can be used to input gas as well as to output gas. The gas delivered by this fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed in the gas, and the

Product Description: Centrifugal Flow Fan Our centrifugal fans are designed to move air and other gases at high speeds. Our centrifugal fans are designed for low noise and low power consumption. They are widely used in air-conditioning, ventilation, heating, cooling and other industrial applications. Our centrifugal fan blowers are available with high frequency (50Hz/60Hz), temperature (20-500), protection level (IP55/IP56), voltage (380v/220v/ 380v/ 400V) and speed (500

Efficient Energy-Saving Industrial Waste Gas Treatment Centrifugal Flow Blower Fan Introduction The 5-06 series Centrifugal Flow Blower Fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. The Centrifugal Flow Blower Fan can be used for more than four years when the concentration of impurities is less than 200 mg/m3. If it

70kw Good Performance High Quality Boiler Centrifugal Blower Fan/exhaust fan/ blower Product Description The 5-10 series ventilator is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. In the coal-fired boiler system, the ventilation and induce draft systems of various boilers with evaporation capacity of 20 tons/hour to 800 tons/hour can be

Coupling Driving Efficient Energy-Saving Centrifugal Flow Blower Fan Introduction Mainly to meet the dust emission requirements of the electric arc furnace exhaust gas purification equipment, improve the workshop environment, to ensure that the dust concentration in the electric furnace working area meets the sanitary standards for industrial enterprises, and can also be used in various occasions with the same functional requirements. The 5-12 series centrifugal flow fan is