"backward curved centrifugal fan"

Forced Draught Material Handling Blower High Air Flow Blower Fan Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed in the

Industrial Gas Delivery High Temperature Centrifugal Fan Backward Curved Introduction 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The motor uses high-efficiency and energy-saving motors from China's leading motor manufacturers (and can also install branded motors required by users), with reliable quality and lower energy consumption. Technical

Industrial Backward Curved Air Supply Biomass Boiler Centrifugal Fan Introduction The 8-17 series high-pressure small-flow fan is designed for applications requiring high pressure. Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement. It is mainly used for blasting furnace blast and other forced air supply, and can also be used for tunnels to exhaust or supply air through hard pipes. The fans are divided into general

Long Lifetime Industrial Boiler ID Explosion Proof Centrifugal Blower Fan Introduction The Long Lifetime Industrial Boiler ID Explosion Proof Centrifugal Blower Fan is designed to work in the high efficiency area to achieve energy saving when operating under variable operating conditions. Long Lifetime Industrial Boiler ID Explosion Proof Centrifugal Blower Fan is jointly designed by the fan energy-saving group of the Ministry of Machinery Industry and organized by the

Stainless Steel Industrial Boiler Secondary Air Explosion Proof Centrifugal Blower Fan Introduction 1.The Stainless Steel Industrial Boiler Secondary Air Explosion Proof Centrifugal Blower Fan can output higher gas pressure, and can provide more gas flow at the same time, low noise. 2. In the case of using the common base, the installation is very simple and basically does not require the support of professional technicians. 3. The motor shaft is elastically connected with

Single Inlet Stainless Steel Exhaust Flue Gas Centrifugal Blower Fan Introduction Single Inlet Stainless Steel Exhaust Flue Gas Centrifugal Blower Fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. They are used in forging furnaces and high pressure forced ventilation and are widely used to transport materials and air. The maximum temperature should not exceed 250 degrees Celsius. Suitable for flow

Aluminium Alloyed Single Inlet Large Capacity Exhaust Centrifugal Flow Fan Introduction The 4-16 series centrifugal Fan can be used for indoor ventilation in general factories and large buildings. It can be used as both an input gas and an output gas. The type of gas transported is air and other non-self-igniting, non-self-explosive, non-surrounding, harmless to the human body and is non-corrosive to steel materials. It can also be made into explosion-proof and flame

High Pressure Centrifugal Ventilation Fans Backward FD Boiler Fan Introduction Of Centrifugal Fan The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The fan system running at normal temperature with an impeller diameter of less than 1400 mm does not require additional configuration of bearing

Low Pressure High Air Flow Backward Curved Dust Collector Fan Introduction G4-10 and series collector fan are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. The air damper can be used to flexibly adjust the pressure and flow of the fan during operation. It is also possible to select a variable frequency motor, with adjust the pressure and flow of the fan by changing the speed. Fan systems with impeller diameters