|Place of Origin:||Henan China|
|Model Number:||SIMO Blower 5-06|
|Minimum Order Quantity:||1 Set|
|Packaging Details:||Export Wooden Case Packing, Steel pallet Packing|
|Delivery Time:||15-35 Days|
|Payment Terms:||T/T, L/C, Payment Term Is Negotiable|
|Supply Ability:||500 Sets Per Month|
|Feature:||High Performance||Motor:||SIEMENS/ABB/By Your Demand|
|Bearing Cooling:||Air Cooling Or Circulating Water Cooling||Power Source:||Three Phase AC Motor|
|Delivery Time:||30 Days||Lubrication:||Oil Bath Lubrication|
industrial centrifugal extractor fan,
explosion proof centrifugal fan
High Temperature Materials Cooling Long Lifetime Industrial Centrifugal Fan
The 5-06 series industrial centrifugal fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace.
High Temperature Materials Cooling Long Lifetime Industrial Centrifugal Fan can be used for more than four years when the concentration of impurities is less than 200 mg/m3.
If it contains a lot of impurities, it also can be used, but it will shorten the service life.
The maximum operating temperature of the induced draft fan must not exceed 250°C.
The performance of the fan is expressed by parameters such as fan flow, full pressure, spindle speed, shaft power and efficiency.
Advantages and Features
12 pieces of backward aerofoil blades are welded between the Arc cone front plate and the flat shaped rear plate. Because of the use of airfoil blades, the fan is guaranteed to have high efficiency, low noise and high strength. The impeller is corrected by static and dynamic balance, so the operation is stable. Forced draught fan and induced draught fan of the same machine number have same impeller structure.
The industrial centrifugal fan casing is a volute welded by ordinary steel plates.
The casing of a single suction fan is made in three different forms: The No. 8 to 12 casing is made into an integral structure and cannot be disassembled; The No. 14 to 16 casing is made into a two open structure; The No. 18~29.5 casing is made into a three open structure.
The induced draft fan and the volute plate are appropriately thickened to prevent wear.
The converging and streamlined air inlet is made into a unitary structure and bolted to the inlet side of the fan.