|
| Place of Origin: | Henan China |
| Brand Name: | SIMO |
| Certification: | CE, ISO9001:2008,TUV |
| Model Number: | SIMO Blower 5-11 |
Industrial Air Filtration System Medium Pressure Centrifugal Fan
Introduction
Mainly to meet the dust emission requirements of the electric arc furnace exhaust gas purification equipment, improve the workshop environment, to ensure that the dust concentration in the electric furnace working area meets the “sanitary standards for industrial enterprises”, and can also be used in various occasions with the same functional requirements.
The 5-12 series industrial centrifugal fan is an enhanced version of the 5-11 series medium pressure industrial centrifugal fan.
The impeller is annealed to completely eliminate the internal stress generated during welding, ensuring that the impeller does not undergo creep and cracks.The impeller is subjected to a high standard of dynamic balance correction to ensure stable operation of the fan. After the production is completed, all products are tested for running and vibration values for reliable operation.
Technical data
|
PRODUCT PARAMETERS
|
|||
|
industrial centrifugal fan Application
|
Temperature | Normal temperature air, Hot air | |
|
Air composition |
Clean air, Dusty air, Corrosive gas, Combustible gas,Powder materials, Light particle materials | ||
|
industrial centrifugal
fan Performance
|
Impeller diameter | 400~1240 |
mm |
| Speed of mainshaft |
1450~2900 |
rpm | |
| Pressure range | 990~3197 | Pa | |
| Flow range |
2750~75330 |
m3/h | |
|
industrial centrifugal
fan Structure
|
Blade | Backward | |
| Impeller support | SWSI (Single Width, Single Inlet), Impeller overhung. | ||
| Drivetrain | Coupling | Can assign | |
| Lubrication | Oil bath lubrication | ||
| Bearing cooling | Air cooling, Water cooling, Oil cooling | ||
|
industrial centrifugal
fan System
configuration |
Motor | ABB, SIEMENS, WEG, TECO, SIMO, Chinese brand… |
Can assign |
| Impeller |
Q235, Q345, SS304, SS316, HG785, DB685... |
||
|
Casing, Air inlet cone, Air inlet damper |
Q235, Q345, SS304, SS316, HG785, DB685... | ||
| Main shaft | 45# steel(High-strength carbon structural steel), 42CrMo, Stainless steel... | ||
| Bearing | FAG, SKF, NSK, ZWZ… | ||
|
industrial centrifugal
fan Optional
components |
System base frame, Protective screening,Silencer, Inlet & Outlet pipeline compensator, Inlet & Outlet flange, Damper, Electric actuator, Shock isolator, Diaphragm coupling, Fluid coupling, Motor rain cover, Temperature sensor, Vibrating sensor, Soft starter, Inverter, Special Electrical Motor,System monitoring Instrument, Lube system, Overhead lube tank etc |
||
Advantages and Features
1. The industrial centrifugal fan bearing housing is reserved for temperature and vibration sensor mounting positions, for convenient to install the fan operation monitoring device.
2. Use liquid lubricant, it is not necessary to open the bearing housing to replace and fill the oil. The bearing housing is provided with an observation window for easy observation of the quality and stock of the lubricating oil.
3. The industrial centrifugal fan bearing housing uses a labyrinth mechanical seal, a unique Leak proof oil design inside, a vent hole at the top, and a sealant on the joint, completely eliminating the possibility of oil leakage in the bearing housing.
4. The industrial centrifugal fan impeller is annealed to completely eliminate the internal stress generated during welding, ensuring that the impeller does not undergo creep and cracks.
5. The industrial centrifugal fan impeller is subjected to a high standard of dynamic balance correction to ensure stable operation of the fan.
6. After the production is completed, all products are tested for running and vibration values for reliable operation.
