Our Products
Q235 Single Inlet Metallurgy Centrifugal Flow Fan Forward High Volume
Q235 Single Inlet Metallurgy Centrifugal Flow Fan Forward High Volume Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings.It can be used to input gas as well as to output gas. The belts used are standard heavy duty which able to withstand the given safety factor. The bearings used are heavy-duty type, grease packed and scaled for protection against fume, moistures and dust. Long life span is ensured by
Air Supply Of Industrial Rotary Kilns Centrifugal Flow Fan
Export Wooden Case Packing, Steel pallet Packing Introduction The 4-09 series large-flow centrifugal fan is suitable for conveying clean air or light materials at normal temperature, most commonly used in industrial furnaces for air supply, light particle/powder/crush/fiber transportation, air drying/cooling of materials, ventilation and smoke exhaust, and other areas. No viscous substances are allowed inside the gas, and the dust and hard particles contained in the gas are
Hg785 Alloyed Steel Single Suction Ventilation Boiler Centrifugal Flow Fan
HG785 Alloyed Steel Single Suction Ventilation Centrifugal Flow Fan Introduction It is boiler induced draft fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above
Large Capacity Long Life Coal Injection Boiler Fan Energy Efficiency
Large Capacity Long Life Coal Injection Boiler Fan Energy Efficiency Introduction 5-12 series high temperature fan is suitable for conveying high temperature gas without corrosion, spontaneous combustion and temperature not exceeding 70O℃. If the dust content of the gas is large, dust removal device with dust removal efficiency not less than 85% should be equipped before the air inlet of the fan to improve the service life of the fan. Where the intake conditions are
Q235 V-Belt Driven High Temperature Kilns Cooling Centrifugal Flow Fan Blower
Q235 V-Belt Driven High Temperature Kilns Cooling Centrifugal Flow Fan Blower Introduction The 8-17 series high-pressure small-flow fan is designed for applications requiring high pressure. Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement. It is mainly used for blasting furnace blast and other forced air supply, and can also be used for tunnels to exhaust or supply air through hard pipes. Technical data series
Carbon Steel Single Inlet Energy Efficiency Cement Fan CFB Boiler
Carbon Steel Single Inlet Energy Efficiency Cement Fan CFB Boiler Introduction The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. The outlet position of the fan is expressed by the outlet Angle of the enclosure: the forward and reverse angles can be made into 0°, 45°, 90°, 135°, 180° and 225° Detail introduction 1. impeller: are forward curved blade, static, dynamic balance, so stable and reliable operation. 2. housing:
Q235 Single Suction Power Plant Fan Anti Explosion Long Life
Q235 Single Suction Power Plant Fan Anti-Explosion Long Life Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. This series of fan can transport corrosive gas containing acid and alkali components and chemical components, corrosion resistance, stronger than other centrifugal fan
16Mn Heavy Duty Heat Dissipation Power Plant Fan Large Capacity
16Mn Heavy Duty Heat Dissipation Power Plant Fan Large Capacity Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Stainless steel centrifugal fan can transport corrosive gases containing acid and alkali components and chemical components. According to customer needs customized
AC Motor Large Capacity Power Plant Fan Energy Saving Kilns Cooling
AC Motor Large Capacity Power Plant Fan Energy Saving Kilns Cooling Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Conveying medium chlorinated tail gas, high concentration of organic matter, using large air volume, high pressure explosion-proof centrifugal fan, coupling
Stainless Steel Double Suction Antiwear Cement Fan Air Purification
Stainless Steel Double Suction Antiwear Cement Fan Air Purification Introduction The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. Fans have many uses in the chemical industry, such as the transportation of chemical raw materials, reaction gases, aeration stirring, sewage treatment, ventilation and exhaust, dust removal and so on. Also for the fertilizer industry phosphoric acid device, compound fertilizer device to
Aluminium Alloyed High Air Flow Air Supply Cement Fan Metallurgy
Aluminium Alloyed High Air Flow Air Supply Cement Fan Metallurgy Introduction The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. It is suitable for conveying non-corrosive high temperature gas with the temperature not exceeding 500℃. If the dust content of the gas is large, the dust removal device with the dust removal efficiency not less than 85% should be equipped before the air inlet of the fan to improve the service
HG785 Alloyed Steel High Pressure Centrifugal Fan Induced Draft
HG785 Alloyed Steel High Pressure Centrifugal Fan Induced Draft Introduction The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. The impeller is made of 12 sloped wing beveled blades, arc-conical front plate and flat-shaped rear plate welded together. The material is made of heat-resistant stainless steel. Impeller dynamic and static balance and overspeed test. Detail
Coupling Driving Forward High Pressure Centrifugal Fan Lime Kiln
Coupling Driving Forward High Pressure Centrifugal Fan Lime Kiln Introduction The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. Fan inlet shall be aerodynamic design round curved section to transit the air to the wheel cone smoothly, it shall have good commutated effect to reduce turbulence, improve fan efficiency and reduce noise. Detail introduction The wheel has a stable
Lime Rotary Kiln High Pressure Centrifugal Fan Wear Resistant
Lime Rotary Kiln High Pressure Centrifugal Fan Wear Resistant Introduction The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. The fan housing shall be made in steel and its thickness and strength should be able to withstand the maximum running weight of the fan. The volute shall be continuously welded and equipped with access door for removing possible foreign objects
Explosionproof High Pressure Centrifugal Fan Fluidized Bed Boiler
Explosionproof High Pressure Centrifugal Fan Fluidized Bed Boiler Introduction The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. The fan adopts advanced technology. The design of backward curved centrifugal wheel is optimized by means of CFD hydro-field simulating. The design is more accordant with the aerodynamic characteristics, high efficiency, and stable airflow. Detail
Q345 Heavy Duty Centrifugal Fans Blast Furnace Energy Saving
Q345 Heavy Duty Centrifugal Fans Blast Furnace Energy Saving Introduction 6-08 series centrifugal fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. All steel laser cut blades are welded and positioned accurately. The overall strength of the blades are designed and welded to withstand long hours high speed operation. Detail introduction Each wheel
Coupling Driven Heavy Duty Centrifugal Fans Furnace Coke Oven
Coupling Driven Heavy Duty Centrifugal Fans Furnace Coke Oven Introduction 6-08 series centrifugal fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. Maximum load surpasses 35% of limit speed to ensure the long-term continuous operation of the security.The drive unit has a protective shield using eye-catching warning color to ensure personal safety.
Efficient Energy Saving Heavy Duty Centrifugal Fans Thermal Power
Efficient Energy-Saving Heavy Duty Centrifugal Fans Thermal Power Introduction The 6-11 series have the characteristics of high efficiency, flat performance curve, wear resistance, and work stability. The plasma cutting, positioning fixture of high precision and all-welding technique contribute to the smoothness, high strength and great reliability of the steel blades that has uniform stress distribution for long-term high speed running. Detail introduction There exists a
