"three phase blower"

Medium Pressure Steam Boiler High Temperature Centrifugal Fan Blower Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Medium temperature: The medium temperature of standard fans is not more than 80 C, the V-belt driving type fan can transport media below 150 C for a long

16Mn Backward Energy Efficiency Antiwear Material Handling Blower Introduction G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. Use liquid lubricant, it is not necessary to open the bearing housing to replace and fill the oil. The bearing housing is provided with an observation window for easy observation of the quality and stock of the lubricating oil.

Long Life Energy Efficiency Single Inlet Dust Collector Fan Detail introduction The 8-17 series high-pressure small-flow fan is designed for applications requiring high pressure. Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement. It is mainly used for blasting furnace blast and other forced air supply, and can also be used for tunnels to exhaust or supply air through hard pipes. Customized design according to

HG785 Alloyed Steel High Temperature Construction Blower Fan Boiler Fan Introduction Of Centrifugal Fan 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. In the case of common base, the installation is very simple and requires little support from a professional technician. Technical data series model Rotation Speed (r/min) Total Pressure (Pa) Air

Carbon Steel Double Suction Material Handling Blower Backward Curved Introduction The 9-11 series fan has a large flow rate and moderate pressure. It is capable of outputting higher gas pressures and providing more gas flow with lower noise. When the airflow resistance is increased, the motor load will be automatically reduced and the motor will not be burnt. Detail introduction 1. Its a high-performance product promoted by the State Economic Commission and the Ministry of

AC Motor Backward Explosion Proof Blower High Wear Resistance Introduction The 6-06.51 series boiler fan is mainly used for the fan system of the 2t/h~670t/h steam boiler of the thermal power plant, and also meets the requirements of the performance parameters of the high pressure head of the fluidized bed furnace. This series of fan design is based on aerodynamic sketches determined by more than one year of model test and adopts advanced proprietary technology, such as high

7-41 series desulfurization high temperature fan Product description The design structure of the large dust removal fan produced by our company is double suction and double support. The air volume and pressure parameters can be optimized according to the working conditions. It is mainly used in steel, coking, building materials and other industries. Product features 1. Using mature and efficient pneumatic model, the operation of the unit is more energy-saving. 2. Using

Product Description The 422kW Q345 High-Strength Low-Alloy Steel Sintering Blower & Induced Draft Fan is built for high-temperature and heavy-duty applications. Made with wear-resistant Q345 steel, it ensures high structural strength and long service life. Ideal for sintering systems in metallurgy, building materials, and other industrial sectors. Specification Series no. 5-12series Feature selection Normal anti-corrosion wear-resisting High temperature anti-explosion

Product Description 4-75kw Q235 Carbon structural steel sintering blower induced draft fan The 4-75kW Q235 Carbon Structural Steel Sintering Induced Draft Fan is designed for high-temperature flue gas and industrial exhaust emission. Constructed with durable Q235 carbon steel for heat and corrosion resistance, it offers robust performance. With a power range of 4-75kW, it delivers high airflow and pressure, ideal for sintering processes and ventilation systems in metallurgy,