"high temperature fans and blowers"

Air Supply Of Industrial Rotary Kilns Anti-Explosion Centrifugal Blower Fan Introduction 6-04 series industrial centrifugal blower fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50C (max 80C), the dust and hard particles contained in the medium is not more than 150 mg / m3. This series of

Long Life Stainless Steel Industrial Boiler Induced Draft Blower Fan Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed in

Alternating Current Fluidized Bed Boiler Dust Collector Blower Fan Introduction The Alternating Current Fluidized Bed Boiler Dust Collector Blower Fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles

Industrial Boiler Induced Draft Antiwear Long Life Blower Fan Introduction 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. It is also suitable for conveying air and non-corrosive, non-self-igniting, non-viscous materials or light powder/debris/short fiber materials.

High Volume Flue Gas Desulfurization Material Handling Centrifugal Blower Fan Introduction The High Volume Flue Gas Desulfurization Material Handling Centrifugal Fan is suitable for indoor ventilation in general factories and large buildings. High Volume Flue Gas Desulfurization Material Handling Centrifugal Blower Fan can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self

Industrial Boiler Waste Gas Dust Collecting Q345 Heavy Duty Centrifugal Fan Introduction The 4-09 series large-flow centrifugal blower fan is suitable for conveying clean air or light materials at normal temperature, most commonly used in industrial furnaces for air supply, light particle/powder/crush/fiber transportation, air drying/cooling of materials, ventilation and smoke exhaust, and other areas. No viscous substances are allowed inside the gas, and the dust and hard

Energy Saving Backward Curved Dust Collector Centrifugal Blower Fan Introduction 1.The Energy Saving Backward Curved Dust Collector Centrifugal Blower Fan can output higher outlet pressure and provide more gas flow at the same time, low noise. Stable operation at higher media temperatures. 2. The fan speed can be flexibly set by matching different belt pulley diameters to make the fan run at the highest efficiency point and reduce energy waste. 3. Motor slide guide can be

High Wear Resistance Air Filtration System Centrifugal Exhaust Flow Fan Introduction 9-03 series fan-type iron furnace special high-pressure centrifugal flow fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The centrifugal flow fan can also be used as the blast for various furnace forging furnaces. High Wear Resistance Air Filtration System Centrifugal Exhaust Flow Fan is also suitable for conveying air and non

Alternating Current Motor Carbon Steel Steam Boiler Centrifugal Flow Fan Introduction The 7-10 series medium pressure centrifugal flow blower fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. Alternating Current Motor Carbon Steel Steam Boiler Centrifugal Flow Fan has the highest efficiency of 87%. Alternating Current Motor Carbon Steel Steam Boiler Centrifugal Flow Fan belongs to small flow and medium pressure series. Alternatin