"centrifugal air blower"

Materials Drying Main Shaft Alternating Current Centrifugal Ventilation Fans Detail introduction : The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances

Alloy Steel Double Suction Medium Pressure Drying Industrial Centrifugal Fans Introduction Of Centrifugal Fan The 6-06 series boiler fan is mainly used for the fan system of the 2t/h~670t/h steam boiler of the thermal power plant, and also meets the requirements of the performance parameters of the high pressure head of the fluidized bed furnace. Technical data series model Rotation Speed (r/min) Total Pressure (Pa) Air Capacity (m/h) Power (kW) 6-06 8D 1450 18592745 11000

Cement High Temperature Materials Cooling Long Lifetime Blower Fan Introduction The 8-03 series high-pressure small-flow fan is designed for applications requiring high pressure. Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement. The fans are divided into general type, explosion-proof type, anti-corrosion type and high temperature type. Centrifugal fan is applied in industrial boiler, (centrifugal fan can be

Pressure Air Flow Corrosive Gas Delivery Centrifugal Blower Fan Introduction This series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. They can transport clean gas, dusty gas,

Low Pressure Forward Metallurgy Centrifugal Ventilation Fans Anticorrosion Introduction The 4-10 series centrifugal Fan can be used for indoor ventilation in general factories and large buildings. The converging and streamlined air inlet is made into a unitary structure and bolted to the inlet side of the fan. A device for regulating the flow of the fan, axially mounted in front of the air inlet. The adjustment range is from 0 (full open) to 90(fully closed). Detail

Q235 Anti-Explosion Smoke Exhaust High Temperature Centrifugal Blower Fan Introduction The 6-11 series have the characteristics of high efficiency, flat performance curve, wear resistance, and work stability. It has excellent performance and can output high pressure. It can be used to transport normal temperature or high temperature non-flammable gases, particles, powder, debris, fibrous materials etc. The fans are commonly used in large-scale industrial systems such as large

AC Motor Forced Ventilating High Temperature Centrifugal Blower Fan Introduction At present, there are many series of boilers, and the situation of burning coal quality is quite different, after installing dust removal equipment and waste heat utilization equipment, insufficient pumping force affects normal operation. In order to overcome the insufficient pumping force due to the above reasons, the furnace has a positive pressure, which affects the combustion and normal

Stainless Steel Efficient Energy-Saving High Pressure Centrifugal Fan Introduction Stainless Steel Efficient Energy-Saving High Pressure Centrifugal Fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 C (maximum not more than 80 C). The dust and hard particles

Backward Curved Materials Drying High Pressure Centrifugal Blower Fan Introduction The Backward Curved Materials Drying High Pressure Centrifugal Blower Fan is designed to work in the high efficiency area to achieve energy saving when operating under variable operating conditions. It is jointly designed by the fan energy-saving group of the Ministry of Machinery Industry and organized by the national fan industry. Its a high-performance product promoted by the State Economic